Syringe Filters
Filters
Syringe Filters
Product Details
Syringe filters offer a fast & efficient means of clarifying & preparing every type of small to mid-volume samples prior to instrument analysis. These syringe filters are validated for retention efficiency, protein binding and chemical compatible & extractable.
Features
- Solvent Resistant Housing
- Wide Chemical Compatibility
- Choice Of Membrane Compatibility with aqueous solution, organic solution or both.
- Faster Flow Rates
- Low Hold-Up Volume
- Multi-layered Prefilter provides two to four times higher throughput.
Types Available
Nylon-66 Membrane Syringe Filters:
Polyethersulfone Membrane Syringe Filters (PESY)
VDF Membrane Syringe Filters(PVSY)
PTFE Membrane Syringe Filters (TFSY)
| Sterilisation | Autoclavable at 121oC for 30 minutes |
| Maximum Operating Temperature | 90°C continuous |
| Maximum Operating Pressure | 7 Kg/cm2 |
| Extractable With Water | Within limits specified in USP. |
All the offered products are also available as Pre-sterilized Individually packed. (Prefix with S in Product Code)
Specifications
| Pore Size (µm) | 0.2 | 0.45 |
| Diameter (mm) | 13 | 25 |
| Effective Filtration Area (cm²) | 0.8 | 4 - 15 |
| Hold - Up Volume (µl) | <20 <50 |
Integrity Test Data
| Type | Pore Size | Bubble Point |
|---|---|---|
| 0.2µm | 52 psi (3.65 kg/cm²) | |
| NNSY Wetting fluid Water | 0.45µm52 psi (3.65 kg/cm²) | |
| 0.8µm | 52 psi (3.65 kg/cm²) | |
| 0.2µm | 52 psi (3.65 kg/cm²) | |
| PESY Wetting fluid Water | 0.45µm52 psi (3.65 kg/cm²) | |
| PVSY Wetting fluid Water | 0.2µm52 psi (3.65 kg/cm²) | |
| 0.45µm | 52 psi (3.65 kg/cm²) |
Ordering Information
| Type | Pore Size | End Connections | Pack Size | |
|---|---|---|---|---|
| XXSY5 | 0.22µm | Inlet | Outlet | 100 Nos. |
| GXXSY13 | 0.45µm | Female | Male | |
| SXXSY25 | 0.8µm | luer | luer | |
| SGXXSY25 | Lock | Lock |